6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to
heat. The recommended maximum fabric temperature is 320 degrees. Printers are
advised to use temperature strips to measure the temperature of the fabric as
it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320
degrees. When placing garments on the belt, lay them as flat as possible to
avoid high spots that may touch the inside of the dryer or come closer to heat
elements. It
is recommended to test (and launder) a shirt before a full production run. This
information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to
heat. The recommended maximum fabric temperature is 320 degrees. Printers are
advised to use temperature strips to measure the temperature of the fabric as
it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320
degrees. When placing garments on the belt, lay them as flat as possible to
avoid high spots that may touch the inside of the dryer or come closer to heat
elements. It
is recommended to test (and launder) a shirt before a full production run. This
information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersRib cuffsDouble-needle bottom hemTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersRib cuffsDouble-needle bottom hemTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersSingle-needle left chest pocket with double-needle hemDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersSingle-needle left chest pocket with double-needle hemDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricBound self-fabric neck and armholesSingle-needle left chest pocket with double-needle hemDouble-needle neck, armhole and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricBound self-fabric neck and armholesSingle-needle left chest pocket with double-needle hemDouble-needle neck, armhole and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricBound self-fabric neck and armholesDouble-needle neck, armhole and bottom hemsTwill label & joker label The neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricBound self-fabric neck and armholesDouble-needle neck, armhole and bottom hemsTwill label & joker label The neon optical and pigment dyes in these shirts are reactive to heat. The recommended maximum fabric temperature is 320 degrees. Printers are advised to use temperature strips to measure the temperature of the fabric as it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320 degrees. When placing garments on the belt, lay them as flat as possible to avoid high spots that may touch the inside of the dryer or come closer to heat elements.It is recommended to test (and launder) a shirt before a full production run. This information is provided only as a guide; individual results may vary...
100% polyester smooth knit body100% polyester lightweight mesh back and side insertsWicks MoistureV-neck collarContrast neck and armhole trimRacerback stylingDesigned to be NFHS compliantPad print label..
8 oz. (US) 13.3 oz (CA), pre-shrunk 50/50 cotton/polyesterOxford is 49/51 cotton/polyesterNuBlend pill-resistant fleeceHigh stitch density for a smooth printing canvas2-ply hood with grommets and matching drawstringDouble-needle stitched neck, armholes, and waistbandSet-in sleevesFront pouch pocketConcealed seam on cuffs1x1 ribbed cuffs and waistband with spandexSeamless bodyQuarter-turned..
5.2 oz., 50/50 combed ringspun cotton/polyester jerseyMoisture management1x1 ribbed collar with double-needle coverstitching on front neckShoulder-to-shoulder tapingDouble-needle hemmed sleeves and bottomQuarter-turned to eliminate center creaseTearaway label..