6 oz., 100% pre-shrunk cottonCharcoal Heather, Oxford Grey, Safety Green and Safety Orange are 60/40 cotton/polyesterLight Steel and Ash are 90/10 cotton/polyesterClassic fitSet-in 1x1 ribbed crewneckSelf-fabric neck tape for comfort
Side seams on sizes 3XL-6XLDouble-needle sleeves and bottom hemQuarter turned body..
6 oz., 100% pre-shrunk cottonAsh is 99/1 cotton/polyesterLight Steel is 90/10 cotton/polyesterOxford Grey and Safety Green are 60/40 cotton/polyesterClassic fitSet in 1x1 ribbed crewneckSelf-fabric neck tape for comfortDouble-needle sleeves and bottom hemQuarter turned body
CPSIA tracking label compliant..
6.1 oz., pre-shrunk 100% ringspun cottonAsh is 99/1 cotton/polyesterLight Steel is 90/10 cotton/polyesterCharcoal Heather and Oxford Grey are 60/40 cotton/polyesterShoulder-to-shoulder taping
Double-needle stitched lay flat collars, sleeves, and bottom hem
Black Label..
6.1 oz., pre-shrunk 100% ringspun cottonAsh is 99/1 cotton/polyesterLight Steel is 90/10 cotton/polyesterCharcoal Heather and Oxford Grey are 60/40 cotton/polyesterShoulder-to-shoulder taping
Double-needle stitched lay flat collars, sleeves, and bottom hem
Black Label..
5.4 oz., 50/50 pre-shrunk cotton/polyesterOxford is 47/53 cotton/polyesterAdvanced moisture-management performanceNoticeably softer hand & excellent printability1x1 ribbed collar
Double-needle stitched sleeves, bottom hem and front neck
Shoulder-to-shoulder tapingQuarter-turned to eliminate center creaseCPSIA tracking label compliantTearaway label..
5.0 oz., pre-shrunk 50/50 cotton/polyesterMade with up to 5% recycled polyester from plastic bottlesClassic fitSet-in 1x1 ribbed crewneckSelf-fabric neck tape for comfortTubularDouble-needle sleeves and bottom hemQuarter turned body..
5.0 oz., pre-shrunk 50/50 cotton/polyesterMade with up to 5% recycled polyester from plastic bottlesClassic fitSet-in 1x1 ribbed crewneckSelf-fabric neck tape for comfortDouble-needle sleeves and bottom hemQuarter turned body
CPSIA tracking label compliant..
4.5 oz. 100% combed ringspun cotton fine jersey, 30 singlesAsh is 99/1 combed ringspun cotton/polyesterHeather is 90/10 combed ringspun cotton/polyesterCVC colors are 60/40 combed ringspun cotton/polyesterAsh and White are sewn with 100% cotton threadTopstitched ribbed knit collar Shoulder-to-shoulder self-fabric back neck tapeDouble needle sleeves and bottom hemSide seamsEasyTear™ label..
5.5 oz., American grown 100% ringspun cottonDouble-needle coverstitchedTwill neck tapeReinforced five-point chest pocketRibbed set in collarShoulder to shoulder tape..
7 oz., 100% ring spun cottonSoft-washed garment-dyed fabricScuba hood with color-matched flatcord1x1 rib on cuffsTwill taped back neckRolled forward shoulderPouch pocketDouble-needle bottom hem with side vents and drop tailDouble-needle neck, shoulder, armhole and cuffsTwill label & joker label..
7 oz., 100% ring spun cottonSoft-washed garment-dyed fabric1x1 rib on collar and cuffsTwill taped back neckRolled forward shoulderPouch pocketDouble-needle bottom hem with side vents and drop tailDouble-needle neck, shoulder, armhole and cuffsTwill label & joker label..
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to
heat. The recommended maximum fabric temperature is 320 degrees. Printers are
advised to use temperature strips to measure the temperature of the fabric as
it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320
degrees. When placing garments on the belt, lay them as flat as possible to
avoid high spots that may touch the inside of the dryer or come closer to heat
elements. It
is recommended to test (and launder) a shirt before a full production run. This
information is provided only as a guide; individual results may vary...
6.1 oz., 100% ring spun cottonSoft-washed garment-dyed fabricDouble-needle collarTwill taped neck and shouldersDouble-needle armhole, sleeve and bottom hemsTwill label & joker labelThe neon optical and pigment dyes in these shirts are reactive to
heat. The recommended maximum fabric temperature is 320 degrees. Printers are
advised to use temperature strips to measure the temperature of the fabric as
it passes through the dryer or heat source.Dryer temperature should be adjusted to keep the fabric below 320
degrees. When placing garments on the belt, lay them as flat as possible to
avoid high spots that may touch the inside of the dryer or come closer to heat
elements. It
is recommended to test (and launder) a shirt before a full production run. This
information is provided only as a guide; individual results may vary...